Author Topic: Lathe Adaptor  (Read 4284 times)

Offline Ginger Nut

  • Full Member
  • ***
  • Posts: 232
Lathe Adaptor
« on: October 20, 2015, 11:49:08 PM »
I am into wood turning and have 2 lathe a Nova 3000 which has a 30mm x 3.5 spindle thread a Jet Mini which has an 1" x 10tpi changing chucks and or main chuck adaptors is ARPIA. So I made an adaptor to fit the Nova and step down to the jet 1" x 10tpi.

This was my first attempt to set up machine cut thread since leaving school at 16yrs  :Doh:

Material is 4140.

Video running

Offline howsitwork?

  • Sr. Member
  • ****
  • Posts: 360
  • Country: england
Re: Lathe Adaptor
« Reply #1 on: November 29, 2015, 04:54:46 PM »
Nice !

Good to find you on here as well.

Ian