Today was the big day! The Xmas/NY period was productively spent - 3/4 headscratching "where the hell are we going to move THAT to so it's out of the way???, and 1/4 actually moving stuff. Oh, and about 1/3 playing "one last" game of pool before dismantling the table for storage. Hopefully one day it'll be out again & wasting more valuable workshop time...
So anyway, here's the pics. Click on them for bigger versions:
Arriving:
![](https://farm2.staticflickr.com/1462/24230714726_d5cfbc713e_c.jpg)
Slipped through the ramp nicely:
![](https://farm2.staticflickr.com/1654/23888991969_e21d3e4530_c.jpg)
Resplendent in its new home:
![](https://farm2.staticflickr.com/1503/24257633025_df5a1b1d3d_c.jpg)
Turrets, 2 off:
![](https://farm2.staticflickr.com/1687/24174299761_69243aebcc_c.jpg)
Mahoosive tailstock (with internal spinny thing I believe):
![](https://farm2.staticflickr.com/1648/24256836275_16c9c79b13_c.jpg)
Eww, a bit grubby in there. Lots of degreaser needed...
![](https://farm2.staticflickr.com/1696/24256832235_77962529a4_c.jpg)
So... toolholders - a few, of sorts, Looks like I'll be busy making some.
Chuck jaws: None - looks like I'll be making or buying some of those too.
Power: Haven't tried it yet... bought the cable & plug, but I'm going to have to run a 63A cable from the leccy box to the lathe, as it wants more than the 32A stuff I've got. I'll spin her up on 32A for now, I suspect the big amps will be needed when those turrets are flying around & taking big heavy cuts.