Author Topic: New to site with SAJO mill  (Read 9560 times)

Offline dyra-va

  • Jr. Member
  • **
  • Posts: 8
New to site with SAJO mill
« on: March 16, 2016, 10:51:00 AM »
I all. I am new to the site and just bought an sajo apf 52 mill with some electrical problems. Does anyone have a diagram and/or manual?


Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: New to site with SAJO mill
« Reply #1 on: March 16, 2016, 12:48:53 PM »
Short answer - no, no documentation.

But that doesn't look too complicated - just relays / contactors and transformers and fuses. What problems are you having?

Andrew Mawson
East Sussex

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: New to site with SAJO mill
« Reply #2 on: March 16, 2016, 01:34:19 PM »
Tony Griffiths has manuals for it:

https://store.lathes.co.uk/sajo
Andrew Mawson
East Sussex

Offline dyra-va

  • Jr. Member
  • **
  • Posts: 8
Re: New to site with SAJO mill
« Reply #3 on: March 16, 2016, 06:21:18 PM »
Short answer - no, no documentation.

But that doesn't look too complicated - just relays / contactors and transformers and fuses. What problems are you having?
Looks like the transformator is burnt. I need to know what I have to buy (brand/description etc) and where to wires that have been cut goes.



Offline dyra-va

  • Jr. Member
  • **
  • Posts: 8
Re: New to site with SAJO mill
« Reply #4 on: March 16, 2016, 06:23:16 PM »
Tony Griffiths has manuals for it:

https://store.lathes.co.uk/sajo
Is the APF 54 the same machine/same diagrams?

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 463
  • Country: at
Re: New to site with SAJO mill
« Reply #5 on: March 17, 2016, 02:02:35 AM »
Are those colored collars on the end of the wires numbered? Can you trace both ends of the cut wires through matching markings?
Mark
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline dyra-va

  • Jr. Member
  • **
  • Posts: 8
Re: New to site with SAJO mill
« Reply #6 on: March 17, 2016, 02:30:07 AM »
Are those colored collars on the end of the wires numbered? Can you trace both ends of the cut wires through matching markings?
Mark
No, no markings anywere :-( that would be easy. I might add that I am a mechanic for a living, been working as a chief mech/hydraulic tech in the oil industry for 20yrs. So no stranger to troubleshooting and repairs. But to fix this I need the diagram. Tried to email the sajo company, maskinplus.se but no answer yet. Thanks for all help and tips tho, appreciate it!!

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: New to site with SAJO mill
« Reply #7 on: March 17, 2016, 03:08:24 AM »
Tony Griffiths has manuals for it:

https://store.lathes.co.uk/sajo
Is the APF 54 the same machine/same diagrams?

He has the 52 as well, scroll down the page
Andrew Mawson
East Sussex

Offline dyra-va

  • Jr. Member
  • **
  • Posts: 8
Re: New to site with SAJO mill
« Reply #8 on: March 17, 2016, 03:42:56 AM »
Tony Griffiths has manuals for it:

https://store.lathes.co.uk/sajo
Is the APF 54 the same machine/same diagrams?

He has the 52 as well, scroll down the page
Is the VF the same as APF? What are the difference in the Machines?

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: New to site with SAJO mill
« Reply #9 on: March 17, 2016, 04:45:48 AM »
No idea - never seen one  :scratch:
Andrew Mawson
East Sussex

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: New to site with SAJO mill
« Reply #10 on: March 17, 2016, 05:59:47 PM »
hi and welcume

Offline Kjelle

  • Full Member
  • ***
  • Posts: 176
  • Country: se
Re: New to site with SAJO mill
« Reply #11 on: March 18, 2016, 04:10:17 AM »
Head over to the thread in "Tools" and follow the links I posted there. Also check maskinisten.net, the forums, and do a search for your machine there.

Another thing (I picked it up from Practical Machinist, which is another forum you can search. But don't join and post before you have read alot there, it has rather stringent rules, ask Andrew). Can you post a FULL front and one side of your machine? Makes it easier to identify for us...

Kjelle

Ps; Found this on a quick Google; www.lpv.se/media/1495/sajo-duo-mill-54.pdf Ds

Offline dyra-va

  • Jr. Member
  • **
  • Posts: 8
Re: New to site with SAJO mill
« Reply #12 on: March 18, 2016, 04:44:44 AM »
Head over to the thread in "Tools" and follow the links I posted there. Also check maskinisten.net, the forums, and do a search for your machine there.

Another thing (I picked it up from Practical Machinist, which is another forum you can search. But don't join and post before you have read alot there, it has rather stringent rules, ask Andrew). Can you post a FULL front and one side of your machine? Makes it easier to identify for us...

Kjelle

Ps; Found this on a quick Google; www.lpv.se/media/1495/sajo-duo-mill-54.pdf Ds
I will take some more photos of it. This is what i have now since i am away from my workshop for awhile.

I have searched the mentioned forums without luck, only got my cell phone now so not that easy with the small screen.

Offline Kjelle

  • Full Member
  • ***
  • Posts: 176
  • Country: se
Re: New to site with SAJO mill
« Reply #13 on: March 18, 2016, 12:40:33 PM »
Ok, did a quick google, and a check on maskinisten.net. In "downloads" there should be a manual that covers most SAJO 52 mills.
Link; https://www.maskinisten.net/downloads.php?view=detail&df_id=2166
https://www.maskinisten.net/downloads.php?view=detail&df_id=3462
The electrical scheme isn't very good, but might help you...

You may have to join the site to download, but that's a small price to pay (no money involved!)

Kjelle

Edit; I just saw you had made a post at maskinisten...

Offline dyra-va

  • Jr. Member
  • **
  • Posts: 8
Re: New to site with SAJO mill
« Reply #14 on: March 18, 2016, 12:52:28 PM »
Ok, did a quick google, and a check on maskinisten.net. In "downloads" there should be a manual that covers most SAJO 52 mills.
Link; https://www.maskinisten.net/downloads.php?view=detail&df_id=2166
https://www.maskinisten.net/downloads.php?view=detail&df_id=3462
The electrical scheme isn't very good, but might help you...

You may have to join the site to download, but that's a small price to pay (no money involved!)

Kjelle
Thx again Kjelle. Allready downloaded this but it will not work on my phone. Will Try from PC. Thx!