Author Topic: In case you missed these High temp sharpie's  (Read 2956 times)

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2568
  • Country: us
In case you missed these High temp sharpie's
« on: April 03, 2016, 08:01:22 AM »
In case you missed these hanging near the check out at your local big box (menards) May not be welding temps 500'F but still might last longer than regular ones in the shop.
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen

Offline Joules

  • Hero Member
  • *****
  • Posts: 1061
  • Country: gb
Re: In case you missed these High temp sharpie's
« Reply #1 on: April 03, 2016, 09:55:25 AM »
Use TIPEX, we marked gas turbine blades with it and they can exceed 1000℃
Just get doing and make swarf, you can decide what its going to be later.   :thumbup:

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6985
  • Country: gb
  • East Sussex, UK
Re: In case you missed these High temp sharpie's
« Reply #2 on: April 03, 2016, 12:49:27 PM »
TIPEX is a useful mask to stop silver solder flowing where you don't want it  :thumbup:
Andrew Mawson
East Sussex

Offline Joules

  • Hero Member
  • *****
  • Posts: 1061
  • Country: gb
Re: In case you missed these High temp sharpie's
« Reply #3 on: April 03, 2016, 12:58:49 PM »
Now that's a useful bit of information I hadn't even thought about...
Just get doing and make swarf, you can decide what its going to be later.   :thumbup:

Offline Manxmodder

  • Hero Member
  • *****
  • Posts: 739
  • Country: gb
Re: In case you missed these High temp sharpie's
« Reply #4 on: April 03, 2016, 01:23:43 PM »
Tipex fluid is really useful stuff in the workshop. I use it to put an start index mark on a chainsaw chain link when I'm sharpening the teeth.

OZ.
Helixes aren't always downward spirals,sometimes they're screwed up

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2568
  • Country: us
Re: In case you missed these High temp sharpie's
« Reply #5 on: April 03, 2016, 05:40:16 PM »
A graphite pencil line will also stop silver solder from crossing #2 pencil never heard of tipex fluid will have to keep a look out for it. :nrocks:
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen

Offline mattinker

  • Hero Member
  • *****
  • Posts: 1122
  • Country: fr
Re: In case you missed these High temp sharpie's
« Reply #6 on: April 03, 2016, 06:14:55 PM »
tipex fluid will have to keep a look out for it. :nrocks:

Tipex is white out in the St(ates.

Regards, Matthew

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2568
  • Country: us
Re: In case you missed these High temp sharpie's
« Reply #7 on: April 14, 2016, 05:39:29 AM »
Ok now, Now about using white out as a  silver solder stop, marking on wood pen blanks,but never thought about using it as a marking item. Will have to try it. :nrocks:
Thanks.
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen