Author Topic: Howdy y'all!  (Read 9058 times)

Offline Toolshed

  • Jr. Member
  • **
  • Posts: 86
  • Country: us
Howdy y'all!
« on: May 04, 2016, 09:18:54 PM »
THIRD time trying to post a howdy message.

Not sure if it was the work computer or PEBCAK....

Just registered today so not sure if all posts go through a mod to post or what....

Anyway, I'll do this one without pictures to see if it takes....
No matter where you go....There you are....

Metalworker
Woodworker
Metal Caster

Google Map of members.  Send me your city/state/country and I will get you added in!
https://www.google.com/maps/d/edit?mid=1yzP6dM2C2yeti0msljLA5Ny_pwQ

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5504
  • Country: us
Re: Howdy y'all!
« Reply #1 on: May 04, 2016, 09:33:13 PM »
Welcome to the collective :borg:

Nope. No pre-mod screening.

Tell us about yourself?

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Toolshed

  • Jr. Member
  • **
  • Posts: 86
  • Country: us
Re: Howdy y'all!
« Reply #2 on: May 04, 2016, 10:34:32 PM »
WILCO!  Glad this post finally came in!  I have tried on may occasions to post up pics of my shop with no luck. (Small JPG images is all)

I am a woodworker, metalworker, metal caster, leatherworker, needlecrafter, jack of all trades kinda guy.  I've been inventing/modding things all my life.

I actually have a very small shops.  I say that plural since according to the season I'm in my garage or in my basement shop.

I have a small aluminum foundry with a turkey fryer furnace.  I just got into that habit a year or so ago.

I am a slingshooter and slingshot fabricator.

Professionally, I am a computer technician with 30 years of torture in that freaking field....

Let me post this then see if my pics will upload....
No matter where you go....There you are....

Metalworker
Woodworker
Metal Caster

Google Map of members.  Send me your city/state/country and I will get you added in!
https://www.google.com/maps/d/edit?mid=1yzP6dM2C2yeti0msljLA5Ny_pwQ

Offline Toolshed

  • Jr. Member
  • **
  • Posts: 86
  • Country: us
Re: Howdy y'all!
« Reply #3 on: May 04, 2016, 10:45:30 PM »
Nope....I think I might need to look into my pictures.  None are uploading.  They're only 2-3 MB each, but I guess that's too much at once....10240KB is 10 MB....I'm nowhere near that range....
No matter where you go....There you are....

Metalworker
Woodworker
Metal Caster

Google Map of members.  Send me your city/state/country and I will get you added in!
https://www.google.com/maps/d/edit?mid=1yzP6dM2C2yeti0msljLA5Ny_pwQ

Offline Toolshed

  • Jr. Member
  • **
  • Posts: 86
  • Country: us
Re: Howdy y'all!
« Reply #4 on: May 04, 2016, 10:57:33 PM »
Aight.  Have to do this sans pictures for now.

ANYHOO.
 :worthless:
I am also making patterns for the Gingery Milling machine.  Since I already have a lathe, I didn't need to start there.  Another member on the AlloyAvenue.com board and I made a deal to trade Gingery patterns, so he has sent my his Gingery Shaper patterns, and in turn I'll be shipping him my Milling machine patterns when I'm done with them.

From here, I'll re-format my pictures and post in the appropriate sections....
No matter where you go....There you are....

Metalworker
Woodworker
Metal Caster

Google Map of members.  Send me your city/state/country and I will get you added in!
https://www.google.com/maps/d/edit?mid=1yzP6dM2C2yeti0msljLA5Ny_pwQ

Offline Toolshed

  • Jr. Member
  • **
  • Posts: 86
  • Country: us
Re: Howdy y'all!
« Reply #5 on: May 05, 2016, 12:00:03 AM »
NOW let's try this....

Just throwing pics in, and funnies, to see what will happen....
Lathe faceplate I cast and machined. 
My casting area (under my back deck, so I guess I really have THREE shops, hahaha!!)
Bone handled whip I braided.
My Turkey Fryer metal furnace (Yes, it has a hood)  and YES, that is a 50 pound chunk of solid steel I use as an anvil on that cut off tree branch.
Some of my cast slingshots.
Gingery Miller Bed pattern.

No matter where you go....There you are....

Metalworker
Woodworker
Metal Caster

Google Map of members.  Send me your city/state/country and I will get you added in!
https://www.google.com/maps/d/edit?mid=1yzP6dM2C2yeti0msljLA5Ny_pwQ

Offline Toolshed

  • Jr. Member
  • **
  • Posts: 86
  • Country: us
Re: Howdy y'all!
« Reply #6 on: May 05, 2016, 12:11:59 AM »
Glad to know it was PEBCAK!!  Got the photo resize utility!!

In case some are wondering, PEBCAK in the computer tech field stands for Problem Exists Between Chair And Keyboard. 

In other words, Issue: Defective End User - Resolution: Replace End User 

Error code 1D10T

:thumbup:

No matter where you go....There you are....

Metalworker
Woodworker
Metal Caster

Google Map of members.  Send me your city/state/country and I will get you added in!
https://www.google.com/maps/d/edit?mid=1yzP6dM2C2yeti0msljLA5Ny_pwQ

Offline DavidA

  • Hero Member
  • *****
  • Posts: 1219
  • Country: gb
Re: Howdy y'all!
« Reply #7 on: May 05, 2016, 06:45:06 AM »
Hi there Toolshed,

Looks as if you have the uploading problem sorted.

I don't do casting yet, still have a box of insulation I got from a fellow member some time ago and am definitely going to make my furnace soon.
In fact I had to evict a rat from the box. Guess he thought it a good place to bed down for the winter.

But so many other things to do.

Anyway, glad you made it here.

Dave.

(DavidA)

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2525
  • Country: gb
Re: Howdy y'all!
« Reply #8 on: May 05, 2016, 08:02:10 AM »
Hi Toolshed,
A very amusing first few posts, I like the TLA, must try that in my son, he's into IT( programmer developer or whatever!...)

eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline PekkaNF

  • Hero Member
  • *****
  • Posts: 2523
  • Country: fi
Re: Howdy y'all!
« Reply #9 on: May 05, 2016, 09:44:55 AM »
Welcome!

Do you know angry fruit salad user interface.

Pekka

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: Howdy y'all!
« Reply #10 on: May 05, 2016, 06:33:09 PM »
hi and welcome

Offline howsitwork?

  • Sr. Member
  • ****
  • Posts: 360
  • Country: england
Re: Howdy y'all!
« Reply #11 on: May 06, 2016, 03:05:49 PM »
bit late but welcome to the institution.

 :coffee:

took me a while to get the pictures working but worth the wait !

Offline Aaronpifow

  • Jr. Member
  • **
  • Posts: 9
Howdy yall
« Reply #12 on: September 10, 2017, 10:11:34 PM »
HEY YALL BACK TO YOU  WELCOME

Welcome fellow southerner and glad you could join us.  Cracker is cute.  Do you know if he is a boy or girl?

Offline Biggles

  • Full Member
  • ***
  • Posts: 236
  • Country: gb
Re: Howdy y'all!
« Reply #13 on: September 14, 2017, 12:00:36 AM »
Hi and Welcome.