Installed propane piping stand and piped up the fuel trane. Nobody is stocking 6" brass nipples, went with galvanized, could not find a conflict in propane code book. Sprayed all joints down with soap and water and turned on the propane, one small leak at 3 way valve, 1/2 turn on fitting and all is good. Set low press. regulator to 10 psi and high press. regulator to 25 psi for now. Ready for service, will modify a barbecue cover to keep the weather off when not in use. Fittings for my atmospheric burner should arrive Tuesday, refractory and paint and were ready to put a fire in it.
Cheers Modders
CB