Author Topic: N/C over travel and home mods  (Read 1751 times)

Offline Doc

  • Hero Member
  • *****
  • Posts: 536
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
N/C over travel and home mods
« on: October 25, 2016, 06:57:20 PM »
  My coolant pump pooped out so I decided to do a mod on my N/C machine that I had been wanting to do. I put it off because I didn't want to void the warranty but thats long gone so I figured nows the time. When I get a new pump I'm going to do a mod there as well so I will be able to switch from food to air blast or mist so I will be able to run either one. And have it controlled by the program.
 Anyway I videoed the first step and uploaded it to Youtube I'll get it wired and post the out come when done.



George

Offline Doc

  • Hero Member
  • *****
  • Posts: 536
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: N/C over travel and home mods
« Reply #1 on: October 26, 2016, 10:01:59 PM »
Ok wired in the micro switch and tested it out to make sur it would repeat and worked like a charm. I did a short video of testing it.


George

Offline Doc

  • Hero Member
  • *****
  • Posts: 536
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: N/C over travel and home mods
« Reply #2 on: November 13, 2016, 03:23:09 PM »
Ok I added new travel switches to my -Y- axis and here is the vid.

George