Author Topic: KBIC 240 controler problem  (Read 5260 times)

Offline jaker

  • Newbie
  • *
  • Posts: 4
KBIC 240 controler problem
« on: January 15, 2017, 09:55:11 AM »
Hi All,

I'm not a electrical genius that's why i hope You can point me in the wright direction. I do have a mini mill with a KBIC 240 controler, the mini mill is the XJ12-300 from Amadeal. The mill is in low RPM's  intermittent and some times loses torque in the middle of a milling cut. Any idea what can be wrong. I have checked the brushes and these are ok.

Any idea is appreciated.

Regards,

Jan from the Netherlands,

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2525
  • Country: gb
Re: KBIC 240 controler problem
« Reply #1 on: January 15, 2017, 10:25:03 AM »
Jan,
The kb controller isnt too compliicated, but fault finding without any test equipment and not having it in front of you doesnt help.....
Is the mill under warranty? If so a call to Hugh at Amadeal might help...
So, options,buy another controller or else have yours repaired....

eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline jaker

  • Newbie
  • *
  • Posts: 4
Re: KBIC 240 controler problem
« Reply #2 on: January 15, 2017, 12:02:20 PM »
Hi John,

Thanks for Your reply. I do have a multimeter. The mill is out of warranty but i opened the site of the mill and found the controlboard and i have seen the potmeter. I think there is something wrong with the potmeter, i saw black sud under one connector, so i wil check that tomorrow. Maybe a new connector could be a problem solver. Otherwise i order a new potmeter from Amadeal.

Regards,

Jan,

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2525
  • Country: gb
Re: KBIC 240 controler problem
« Reply #3 on: January 15, 2017, 12:16:51 PM »
Jan,
The speed pot is connected to P1,P2 and P3 on the pcb.....you could check the connections, making sure they are secure.  :zap:

The speed pots are known to fail, I've changed mine twice during the life of my machine.... :scratch:

Keep us posted on your progress.... :thumbup:
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline jaker

  • Newbie
  • *
  • Posts: 4
Re: KBIC 240 controler problem
« Reply #4 on: January 16, 2017, 09:29:53 AM »
Hi John,

I took a closer look at the potmeter and turned it verry slowly up, seems like there is something wrong with the wiper, i suspect not good contact. So i looked at the WD40 can i have and found out it is usable as a contact spray. So i gave it a try and sprayed some in the potmeter. It looks like the problem is solved. I'm a happy man.  :) :)

Thanks for your advise,

Regards,

Jan,

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2525
  • Country: gb
Re: KBIC 240 controler problem
« Reply #5 on: January 16, 2017, 10:16:24 AM »
Great news.....! :)

You can now show us some photos of your work, now the mill is repaired.... :dremel:
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr