Author Topic: Suggestions Please for Storing Sheet Materials  (Read 15001 times)

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Suggestions Please for Storing Sheet Materials
« Reply #25 on: April 10, 2017, 08:10:02 AM »
The piles of plate accumulated, this size is JUST about man handle-able  :thumbup:

Andrew Mawson
East Sussex

Offline PK

  • Sr. Member
  • ****
  • Posts: 369
  • Country: au
Re: Suggestions Please for Storing Sheet Materials
« Reply #26 on: April 10, 2017, 08:10:42 AM »
Wow, that's quite a nibbler!
My little pneumatic one would herniate itself if I shoved 6mm plate into



(unmangled by AWEM 13:38)
« Last Edit: April 10, 2017, 08:28:17 AM by awemawson »

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Suggestions Please for Storing Sheet Materials
« Reply #27 on: April 10, 2017, 08:12:24 AM »
Then they all got dangled from the fork lift using one of my magnetic lifters, and given a good coat of Shell Ensis rust preventing oil, before being stacked on a pallet and tucked away in a storage container.

At last I have my floor back !

Andrew Mawson
East Sussex

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Suggestions Please for Storing Sheet Materials
« Reply #28 on: April 10, 2017, 08:25:45 AM »
----oops sorry PK I seem to have trampled all over your reply  :bang:

The truth is I was hurrying, having just been called for lunch, and pressed Modify when I meant to press Quote  :palm:
Andrew Mawson
East Sussex

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Suggestions Please for Storing Sheet Materials
« Reply #29 on: April 10, 2017, 08:28:51 AM »
Wow, that's quite a nibbler!
My little pneumatic one would herniate itself if I shoved 6mm plate into


It doesn't come out to play very often, but when it does it's very handy.

I have actually cut 8 mm plate with it !!!!
Andrew Mawson
East Sussex