Author Topic: Gyroscope Project  (Read 3847 times)

Offline David Cambridge

  • Jr. Member
  • **
  • Posts: 15
Gyroscope Project
« on: April 05, 2017, 03:19:32 AM »
Hello All

I’m just finished another casting and machining project – this time a model gyroscope.

If you like the video (or hate it for that matter!) please do 'comment/thumbs up/thumbs down' on YouTube as appropriate.

Making any project seems to take five times as long when I video the process, but if people enjoy watching then it makes it worthwhile. The opposite is of course also true!

The build:



The demo:




David

Offline DMIOM

  • Hero Member
  • *****
  • Posts: 676
  • Country: gb
  • Isle of Man
Re: Gyroscope Project
« Reply #1 on: April 05, 2017, 04:11:19 AM »
Bravo - thanks for showing & sharing.

Dave

Offline Biggles

  • Full Member
  • ***
  • Posts: 236
  • Country: gb
Re: Gyroscope Project
« Reply #2 on: April 06, 2017, 12:12:56 AM »
That’s an interesting Gyro project David, thanks for sharing.  :clap:

Offline Rockytime

  • Newbie
  • *
  • Posts: 2
Re: Gyroscope Project
« Reply #3 on: April 06, 2017, 08:48:37 PM »
 :clap: What a wonderful project! Thanks for great video too.

Offline mechman48

  • Sr. Member
  • ****
  • Posts: 327
  • Country: gb
Re: Gyroscope Project
« Reply #4 on: April 11, 2017, 05:30:05 AM »
Nicely done. I have made two attempts at a gyro from Clickspring design... can't get the rpm's fast enough with cord to spin it up as he can, so they are in the 'get back to it box'  eventually will, I s'pose ... :med:

G.
George.


Always look on the bright side of life, & remember.. KISS..' Keep It Simple Stupid'