Author Topic: Another Ball Turner...With An Added Feature  (Read 747 times)

Offline snub

  • Full Member
  • ***
  • Posts: 143
  • : ca
  • Canada
Another Ball Turner...With An Added Feature
« on: November 11, 2017, 09:19:21 PM »
I motorized it.

The height of the handle was causing pain in my old arm and shoulder, so I put a motor on it. It's a 15 RPM 12 Volt gear reduction motor hooked up to PWM so I can slow it right down and get some nice finishing passes on the workpeace.

.

Offline snub

  • Full Member
  • ***
  • Posts: 143
  • : ca
  • Canada
Re: Another Ball Turner...With An Added Feature
« Reply #1 on: November 11, 2017, 09:23:04 PM »
The exciting video:









« Last Edit: November 12, 2017, 12:06:43 PM by Brass_Machine »

Offline PK

  • Sr. Member
  • ****
  • Posts: 305
  • : au
Re: Another Ball Turner...With An Added Feature
« Reply #2 on: November 12, 2017, 01:15:17 AM »
:-) Good stuff!

Offline Joules

  • Hero Member
  • *****
  • Posts: 892
  • : gb
Re: Another Ball Turner...With An Added Feature
« Reply #3 on: November 12, 2017, 12:16:09 PM »
Nice, but I would want something to protect the belt from swarf.
Just get doing and make swarf, you can decide what its going to be later.   :thumbup: