Author Topic: High speed drill attachment for lathe  (Read 1607 times)

Online Doc

  • Hero Member
  • *****
  • Posts: 539
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
High speed drill attachment for lathe
« on: December 09, 2017, 04:14:58 PM »
Ok started working n my high speed drill plan for my lathe. Hopefully it will work. I am waiting for a small drill chuck that I ordered but I figured I could get started.








George

Online Doc

  • Hero Member
  • *****
  • Posts: 539
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: High speed drill attachment for lathe
« Reply #1 on: December 11, 2017, 05:13:53 PM »
2nd installment in high speed drill attachment for the lathe. Cutting holding cup, drill  and boring tail stock Morris taper blank. Just waiting fr drill chuck to arrive.






George

Online Doc

  • Hero Member
  • *****
  • Posts: 539
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: High speed drill attachment for lathe
« Reply #2 on: December 23, 2017, 06:05:18 PM »
Ok here is another video on the high speed drill for lathe.








George

Online Doc

  • Hero Member
  • *****
  • Posts: 539
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: High speed drill attachment for lathe
« Reply #3 on: December 24, 2017, 01:29:12 PM »
Ok so the potting it I did something wrong it was way off center. So ended up re-doing it.












George

Online Doc

  • Hero Member
  • *****
  • Posts: 539
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: High speed drill attachment for lathe
« Reply #4 on: December 25, 2017, 06:10:22 PM »
Ok Merry Christmas everyone. Here it is Christmas day and I spent a little time out in the shop. I used the high speed attachment for the lathe and the high speed drill press. Everything worked like a dream here are some pictures f the part I made today.
George