Author Topic: High speed drill attachment for lathe  (Read 1661 times)

Offline Doc

  • Hero Member
  • *****
  • Posts: 540
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
High speed drill attachment for lathe
« on: December 09, 2017, 04:14:58 PM »
Ok started working n my high speed drill plan for my lathe. Hopefully it will work. I am waiting for a small drill chuck that I ordered but I figured I could get started.









Offline Doc

  • Hero Member
  • *****
  • Posts: 540
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: High speed drill attachment for lathe
« Reply #1 on: December 11, 2017, 05:13:53 PM »
2nd installment in high speed drill attachment for the lathe. Cutting holding cup, drill  and boring tail stock Morris taper blank. Just waiting fr drill chuck to arrive.







Offline Doc

  • Hero Member
  • *****
  • Posts: 540
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: High speed drill attachment for lathe
« Reply #2 on: December 23, 2017, 06:05:18 PM »
Ok here is another video on the high speed drill for lathe.









Offline Doc

  • Hero Member
  • *****
  • Posts: 540
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: High speed drill attachment for lathe
« Reply #3 on: December 24, 2017, 01:29:12 PM »
Ok so the potting it I did something wrong it was way off center. So ended up re-doing it.













Offline Doc

  • Hero Member
  • *****
  • Posts: 540
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: High speed drill attachment for lathe
« Reply #4 on: December 25, 2017, 06:10:22 PM »
Ok Merry Christmas everyone. Here it is Christmas day and I spent a little time out in the shop. I used the high speed attachment for the lathe and the high speed drill press. Everything worked like a dream here are some pictures f the part I made today.