Author Topic: torch for metal melting foundry (audio in portuguese)  (Read 3553 times)

Offline celsoari

  • Full Member
  • ***
  • Posts: 132
  • Country: br
torch for metal melting foundry (audio in portuguese)
« on: January 16, 2018, 04:28:26 PM »
How i made my torch:
&t=54s

greeting from Brazil
Celso Ari
Greetings from Brazil

Offline tom osselton

  • Hero Member
  • *****
  • Posts: 1255
  • Country: ca
Re: torch for metal melting foundry (audio in portuguese)
« Reply #1 on: January 16, 2018, 04:40:29 PM »
That works quite well thanks for showing.

Offline celsoari

  • Full Member
  • ***
  • Posts: 132
  • Country: br
Re: torch for metal melting foundry (audio in portuguese)
« Reply #2 on: January 17, 2018, 05:01:03 AM »
That works quite well thanks for showing.

Thanks Tom
Greetings from Brazil

Offline seadog

  • Full Member
  • ***
  • Posts: 223
  • Country: gb
  • NE London
Re: torch for metal melting foundry (audio in portuguese)
« Reply #3 on: January 17, 2018, 05:16:07 AM »
Did anyone notice the state of the table on his pillar drill?  :bugeye:

Offline philf

  • Hero Member
  • *****
  • Posts: 1108
  • Country: gb
Re: torch for metal melting foundry (audio in portuguese)
« Reply #4 on: January 17, 2018, 05:28:23 AM »
Did anyone notice the state of the table on his pillar drill?  :bugeye:

I've seen worse!

I once went to look at a Fobco drill and the table was in two pieces. A piece of 3mm aluminium held the two parts together. Needless to say, I didn't buy it.
Phil Fern
Location: Marple, Cheshire

Offline mattinker

  • Hero Member
  • *****
  • Posts: 1316
  • Country: fr
Re: torch for metal melting foundry (audio in portuguese)
« Reply #5 on: January 17, 2018, 06:59:22 AM »
Did anyone notice the state of the table on his pillar drill?  :bugeye:

So what?

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: torch for metal melting foundry (audio in portuguese)
« Reply #6 on: January 17, 2018, 07:30:49 AM »
 
  Hi Celso
                      Some good ideas on this torch, and made mostly from off the shelf stock items. Easy to make for any one with limited machinery.
                                 Well Done
                                                          Cheers David

Offline celsoari

  • Full Member
  • ***
  • Posts: 132
  • Country: br
Re: torch for metal melting foundry (audio in portuguese)
« Reply #7 on: January 18, 2018, 06:39:29 AM »

  Hi Celso
                      Some good ideas on this torch, and made mostly from off the shelf stock items. Easy to make for any one with limited machinery.
                                 Well Done
                                                          Cheers David

thanks Mr. David
greetins from Brazil
Celso Ari
Greetings from Brazil