Gallery, Projects and General > How do I??

Servicing a screw compressor ??

(1/1)

ksor:
How do I or should I even do a DIY service on such a compressor:

https://kelds.weebly.com/uploads/2/8/3/9/2839278/4990958.jpg

Anyone have some recommendations ?

John Rudd:
Change the oil and the intake filter.....

awemawson:
Not worth servicing, chuck it out, I'll help you and take it off your hands to save you the trouble   :lol:


Are you aware that manuals with maintenance details are downloadable from Duncan Rogers ?

https://www.duncanrogers.com/

https://www.duncanrogers.com/literature/62%20305%20052%2012%20ed00%20RLR%2015%20%C3%A0%2040%20EN.pdf

PK:
As stated, oil, intake filter.
Ours has an oil filter too and little water separator which we drain and we always strip and clean the unloading valve as it isn't a solenoid and is triggered by air bleeding through tiny holes.

ksor:

--- Quote from: awemawson on May 18, 2018, 12:44:21 PM ---Not worth servicing, chuck it out, I'll help you and take it off your hands to save you the trouble   :lol:


Are you aware that manuals with maintenance details are downloadable from Duncan Rogers ?

https://www.duncanrogers.com/

https://www.duncanrogers.com/literature/62%20305%20052%2012%20ed00%20RLR%2015%20%C3%A0%2040%20EN.pdf

--- End quote ---

Thx for the links !

I think there is a way too long distance between us  :scratch:

I'll read the manual and see if I'm better off afterwards.

Navigation

[0] Message Index