Gallery, Projects and General > How do I??
Servicing a screw compressor ??
(1/1)
ksor:
How do I or should I even do a DIY service on such a compressor:
https://kelds.weebly.com/uploads/2/8/3/9/2839278/4990958.jpg
Anyone have some recommendations ?
John Rudd:
Change the oil and the intake filter.....
awemawson:
Not worth servicing, chuck it out, I'll help you and take it off your hands to save you the trouble :lol:
Are you aware that manuals with maintenance details are downloadable from Duncan Rogers ?
https://www.duncanrogers.com/
https://www.duncanrogers.com/literature/62%20305%20052%2012%20ed00%20RLR%2015%20%C3%A0%2040%20EN.pdf
PK:
As stated, oil, intake filter.
Ours has an oil filter too and little water separator which we drain and we always strip and clean the unloading valve as it isn't a solenoid and is triggered by air bleeding through tiny holes.
ksor:
--- Quote from: awemawson on May 18, 2018, 12:44:21 PM ---Not worth servicing, chuck it out, I'll help you and take it off your hands to save you the trouble :lol:
Are you aware that manuals with maintenance details are downloadable from Duncan Rogers ?
https://www.duncanrogers.com/
https://www.duncanrogers.com/literature/62%20305%20052%2012%20ed00%20RLR%2015%20%C3%A0%2040%20EN.pdf
--- End quote ---
Thx for the links !
I think there is a way too long distance between us :scratch:
I'll read the manual and see if I'm better off afterwards.
Navigation
[0] Message Index
Go to full version