Author Topic: Pratt and Burnerd LC lever type collet chuck  (Read 224 times)

Offline Biggles

  • Full Member
  • ***
  • Posts: 233
  • Country: gb
Pratt and Burnerd LC lever type collet chuck
« on: June 14, 2018, 11:22:37 AM »
Hi All, I have recently come into possession of a lever type collet chuck advertised as a Crawford. On further inspection I have found it to be a Burnerd multisize of lever type with EC collets. The collets supplied were in fact Crawford but the chuck did not have any ID, probably worn.
I have now taken it apart and found a exploded diagram of the LC type chucks as below. The chuck is missing item 18 on the drawing, can anybody help firstly with the workings of the two key type items 16, 18 as I haven’t a clue as to what they do. Secondly what is item 18 and any help on dimensions, drawings for the purpose of making or purchasing would help in restoration. If anybody has one; it doesn’t need to be the same size as reading in the notes the LC 10 to xx’s have the same item dimensions inside. Photos and measurement will definitely help.
 :nrocks:



Offline JohnC

  • Jr. Member
  • **
  • Posts: 40
  • Country: gb
  • Location: York, UK
Re: Pratt and Burnerd LC lever type collet chuck
« Reply #1 on: June 20, 2018, 12:52:23 PM »
Hi Biggles,
I have the same chuck, and guess what - no item 18 either!  So maybe not that important - the chuck works just fine as it is. 
Hope that helps,
John
John C
York, UK

Offline Biggles

  • Full Member
  • ***
  • Posts: 233
  • Country: gb
Re: Pratt and Burnerd LC lever type collet chuck
« Reply #2 on: June 21, 2018, 10:23:01 AM »
Hi John, it seems to work after a fashion but the locking mechanism obviously will not. Since there are two keyways in the lever mechanism I can only assume that item 16 is stationary and 18 sits in the other keyway. When the lever is pulled round item 18 overrides 16 which make for a long pushing plunger in addition when the lever is pulled forward this plunger forces the collet out. Anyway that is my assumption.
George