The Shop > Tools

Unknown bandsaw.

(1/5) > >>

DavidA:
Hi all,

long time since I posted anything, But here goes.

A week or so ago I was driving into town and passed a scrap collectors wagon. On the back was the band saw pictured below.

It didn't have a blade, and appears not to have been used for some time. A fiver changed hands and it was mine.
And it runs. Appears to be in generally good condition.

It has two speed ranges, and two options on each range, although the lowest speed of 160 ft/min may be a little fast for cutting steel. I think 80 fpm would be better. I can deal with that though.

The overall appearance, style of casing etc, is very similar to my DeWalt bandsaw.

But, as there is no makers name on the casing I can't be sure.

Anyone know who manufactured it ?

Dave.

awemawson:
Picture not showing David  :scratch:

DavidA:
 Oops, forgot the attachments; try again.

John Rudd:
Looks very much like a Naerok machine...

DavidA:
John,

Thanks for the info.

It certainly appears to be a Nearok machine.  and belts and blades are available.

I may make some new pullys to slow down the blade speed in the future. But for now it can be used as-is to cut aluminium and wood.

Dave. :thumbup:

Navigation

[0] Message Index

[#] Next page