The Craftmans Shop > New from Old
New from new?
russ57:
Digging holes, but my post hole digger can't quite lift dirt from the bottom. You pull the handles apart to grab a handful of dirt, but the spread is too wide for the hole.
So, buy a cheap one, get out the oxy, and...
Now they open less, but can still grab from the bottom...
Russ
russ57:
The blue are the original fully open, the green are the new ones.
Not as good for digging but better for lifting.
Russ
awemawson:
I have a pair of those, and neither have the weight for proper digging, but are ok for cleaning up a hole bored with a hole borer.
I've borrowed 'proper' ones in the past where the 'spades' were made from a decent thickness of steel and with a lift and plunge action would even dig our heavy clay.
The only 'mod' that I made to mine was to drill a hole in one of the spades so that they could hang handles downwards from a nail.
Otherwise they fall on the floor like a drunken giraffe :lol:
russ57:
This is what I use for the digging bit at the moment...
An aldi special, runs happily off my domestic air compressor.
Russ
russ57:
I also have a borrowed powered post hole borer, but it's a two man job, preferably two men not including me. I have rocky soil and when it grabs it can do one an injury.
Russ
Navigation
[0] Message Index
[#] Next page
Go to full version