Author Topic: Marking out  (Read 2506 times)

Offline appletree

  • Full Member
  • ***
  • Posts: 202
Marking out
« on: January 14, 2019, 01:59:19 PM »
Hi
For general marking out, I reserve a cheap set of digital callipers, I set them to the required dimension and use them as "odd leg" callipers, there is a slight error as because the legs are the same length the have to be angled over a tad so the register on the datum edge.
Even so near enough for government work, in your eyes are good you can manage without layout blue.
Might even  get round to grinding a cheap set so they are "odd legs"

Phil