Gallery, Projects and General > Project Logs
Slightly scary machining
WeldingRod:
I scored a facing head on that auction site... who could resist the Copper control ring! I tried it out tonight. It works!
Sent from my SAMSUNG-SM-G891A using Tapatalk
SwarfnStuff:
Well, that sure is different. (To me anyway)
Guess your finish comes with practice on using the copper / brass ring thing?
OH and you are correct in the scary bit. Not sure I would like my fingers close to that gizmo.
Thanks for showing,
John B
Doc:
Have never seen any like that but have used a Wolhhaupter which is very capable of doing that plus tappers and facing the bottoms of holes.
Mike E.:
I would think that the tool was not designed to be used in a mill, but for milling in a lathe; where the material is rotating in the chuck, and the tool is manually operated in the tailstock.
seadog:
Have you never seen a taper boring head? It's adjusted in exactly the same way.
&ab_channel=jack
Navigation
[0] Message Index
[#] Next page
Go to full version