Gallery, Projects and General > Project Logs

Slightly scary machining

(1/5) > >>

WeldingRod:
I scored a facing head on that auction site... who could resist the Copper control ring!  I tried it out tonight.  It works!



Sent from my SAMSUNG-SM-G891A using Tapatalk

SwarfnStuff:
Well, that sure is different. (To me anyway)
       Guess your finish comes with practice on using the copper / brass ring thing?
OH and you are correct in the scary bit. Not sure I would like my fingers close to that gizmo.
Thanks for showing,
John B

Doc:
Have never seen any like that but have used a Wolhhaupter which is very capable of doing that plus tappers and facing the bottoms of holes.

Mike E.:
I would think that the tool was not designed to be used in a mill, but for milling in a lathe; where the material is rotating in the chuck, and the tool is manually operated in the tailstock.

seadog:
Have you never seen a taper boring head? It's adjusted in exactly the same way.

&ab_channel=jack

Navigation

[0] Message Index

[#] Next page