Author Topic: New in!  (Read 7658 times)

Offline Brent Crude

  • Jr. Member
  • **
  • Posts: 10
New in!
« on: March 26, 2019, 06:52:38 PM »
Evening, all! After a few messages with one of the resident mods here, Iíve registered and will be nosing around with interest at all the shenanigans youíve been up to.
My name is Cliff. Iím into machine tools and have been since starting work for Hurco in 1983. Iíve spent half of my life roaring around the country installing and repairing CNC machining centres and now spend most of my days in internal tech support and fitting out unusual machining cells with robots and other oddball options.
This place looks very intriguing and Iím looking forward to being part of it!

Online awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7051
  • Country: gb
  • East Sussex, UK
Re: New in!
« Reply #1 on: March 26, 2019, 06:55:50 PM »
Welcome to the forum Cliff, sounds like you will fit in splendidly :thumbup:

Do you confine your machine activities to working hours, or are you also a "man with a shed" ?
Andrew Mawson
East Sussex

Offline Brent Crude

  • Jr. Member
  • **
  • Posts: 10
Re: New in!
« Reply #2 on: March 27, 2019, 02:34:47 AM »
Hi, Andrew. Iím afraid I donít currently tinker with iron in my shed! Normally, the lunacy that it daytime gives me my fix. We are given free rein to play with whatever machinery we like to do any little projects we may have going on. Iíd dearly love to put one of our little CNCs in my garage though but the missus would never see me again!

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5283
  • Country: us
Re: New in!
« Reply #3 on: March 27, 2019, 12:06:34 PM »
Hi Brent  :wave:

Welcome to the collective :borg:

Would like to hear a bit more about the "little CNCs"

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline tom osselton

  • Hero Member
  • *****
  • Posts: 1022
  • Country: ca
Re: New in!
« Reply #4 on: March 27, 2019, 02:17:59 PM »
Welcome Brent! Iím hoping you know something about a 95 Cincinnati Avenger 250t that Iím going to post about soon.

Offline Brent Crude

  • Jr. Member
  • **
  • Posts: 10
Re: New in!
« Reply #5 on: March 27, 2019, 07:49:59 PM »
Itís sweet to be in! If there is any help I can bring here, Iíll give it a go! For the most part, over the years, the machines I deal with have had either Yaskawa, Fanuc or Siemens servo systems. Currently, they are Yaskawa EtherCat (networked servos) which are a tad different to the more analogue based DAC driven servos that came before.
I donít know how common Hurco mchines are amongst you all but someone out there must have driven one at some point!
Anyhoo, hi to you all!

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2083
  • Country: gb
Re: New in!
« Reply #6 on: March 28, 2019, 03:21:03 PM »
hi and welcome