Author Topic: what are the bars with the black bits on for ?  (Read 1389 times)

Offline bodgit

  • Newbie
  • *
  • Posts: 4
what are the bars with the black bits on for ?
« on: March 26, 2019, 07:05:13 AM »
I bought this off FB marketplace for 10 , I can see what the threaded bits do ,but not the bars with the black  tubes around them , any ideas anybody

Offline Country Bubba

  • Jr. Member
  • **
  • Posts: 53
  • Country: us
  • LaGrange, GA USA
Re: what are the bars with the black bits on for ?
« Reply #1 on: March 26, 2019, 07:18:05 AM »
Those would be the standards for the various sizes to verify the size when you put the extension tubes in the anvil.

Country Bubba
Art
Country Bubba

Offline bodgit

  • Newbie
  • *
  • Posts: 4
Re: what are the bars with the black bits on for ?
« Reply #2 on: March 26, 2019, 07:42:33 AM »
oh right i get it , thanks

Offline Pete.

  • Hero Member
  • *****
  • Posts: 935
  • Country: gb
Re: what are the bars with the black bits on for ?
« Reply #3 on: March 26, 2019, 02:06:59 PM »
The black bits are plastic insulators to prevent the heat from your hand from getting into the standards and making them grow in length whilst you are setting the mic.