Author Topic: Baker Fan demonstrations and information for Steam, Stirling or Hit & Miss Engin  (Read 3651 times)

Offline Jim Dobson

  • Full Member
  • ***
  • Posts: 125
Baker Fan demonstrations and information for Steam, Stirling or Hit & Miss Engines - Put a load on!

Since making these Baker Fans and running them off an assortment of engines I have been asked many times for build hints, dimensions and advice so hopefully I have covered it all and given some demonstrations with the video shorts of just how a Baker Fan gives you a whole other dimension when running your engines under this simple device that puts them under a working load.


Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
I particularly liked the sound of the PM Research #3 engine. Also have a soft spot for horizontal mill engines in general.
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline Jim Dobson

  • Full Member
  • ***
  • Posts: 125
I particularly liked the sound of the PM Research #3 engine. Also have a soft spot for horizontal mill engines in general.

Thanks Steve, makes such a difference hearing these small engines under a load.