« previous next »
Pages: [1]   Go Down

Author Topic: Elmers Tiny  (Read 6762 times)

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Elmers Tiny
« on: October 05, 2009, 03:24:41 PM »
Just to let u all know I finally made a runner. And broke the crankshaft and fixed it again.

The first one was 2 part fixed with superglue???  My four year old loved the engine so much it did not last an hour.  I then made the replacement by turning it out of as solid piece in the four jaw chuck--seems fine so far.



FLywheel is 16mm diam and 4.5 wide.(forgot to put somthing for scale.)

Gerhard
Logged
Guernsey
Channel Islands

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
Re: Elmers Tiny
« Reply #1 on: October 05, 2009, 06:43:12 PM »
Nice 1 Gerhard well done on making a runner! :bow: :beer:

Like the oversized base ... it's certainly different!

Nick

Logged
Location: County Durham (North East England)

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Elmers Tiny
« Reply #2 on: October 05, 2009, 06:57:19 PM »
geroli 
 
Good little engine. Sounds like your 4 year old has got him a new toy. Now you are going to have to build another one for yourself. :lol: :lol:


Cheers  :beer:

Don

 


Logged
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Elmers Tiny
« Reply #3 on: October 06, 2009, 01:46:49 AM »
Good one Gerhard  :clap: :clap:

Your young son will treasure that engine, I've still got the steam engine my father gave me a long long time ago.

Have fun

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Re: Elmers Tiny
« Reply #4 on: October 06, 2009, 04:12:25 AM »
THanks for the nice comments.

Nick plan with the oversize base was to have a controll valve in the middle of the pipe.  Dont think Sean would let me have it back to make the valve.

Don I hope to make one of my own design later but a lot of tools on top of the list.

Gerhard
Logged
Guernsey
Channel Islands

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5504
  • Country: us
Re: Elmers Tiny
« Reply #5 on: October 06, 2009, 11:15:25 AM »
Nice job! Love making things for my children!

Eric
Logged
Science is fun.

We're all mad here. I'm mad. You're mad.
Pages: [1]   Go Up
« previous next »