Cheers lads ,,,,,,,,,,,,,,,,,,,It will be GRAY
Well i have had a very slow couple of weeks ,,,,,,,,,naff all done really
,,but i did make the splash back
Not very interesting ,i no , just a bit of metal bending ,,,but the method of welding the parts together may be of interest to someone .
Plug welded ........with the MIG welder ,,,,,just like a spot weld ,,, also good for fixing thin sheet to say heavy box section
Here is how on a couple of scrap bit of sheet ,,, punch /drill hole in one part
position and clamp parts together,,,,,,,,, position MIG touch over hole with wire in the centre of hole
pull trigger " one elephant " release trigger
you just want to fill the hole flush
and a view of the back
Cheers Rob
Now to take Johns advice and do some thing
Edit : any of you chaps have an 8" three jaw chuck going spare,not using as the 6" one on the lathe is a tad small