Author Topic: Griffith control arm  (Read 3695 times)

Offline duckman

  • Jr. Member
  • **
  • Posts: 8
Griffith control arm
« on: April 28, 2010, 07:37:47 PM »
Is there any one who would know what the rear lower control arm on a 1965 or 1966 Griffith is from, it is obviously automotive and a forging . For those that don't know, a Griffith is a TVR with a Ford V8 under the bonnet

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2231
  • Country: gb
Re: Griffith control arm
« Reply #1 on: April 29, 2010, 07:13:19 AM »
Got a picture of it?
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline usn ret

  • Full Member
  • ***
  • Posts: 116
Re: Griffith control arm
« Reply #2 on: April 29, 2010, 05:18:59 PM »
Duckman,  You might try this site http://www.absoluteastronomy.com/topics/tvr   It is a tvr q&a site and covers some of the tvr/griffith history.  Hope this helps.  :)
Cliff :beer:
If it isn't broken your not looking hard enough!