Author Topic: A new model from Achim  (Read 4548 times)

Offline cidrontmg

  • Full Member
  • ***
  • Posts: 229
  • Country: pt
A new model from Achim
« on: June 01, 2010, 07:54:10 AM »
Just in case you havenīt noticed, thereīs something new in  http://metallmodellbau.de/  , thatīs Joachim Steinkeīs site, he sometimes posts here as Achim. The site is in german, but the pictures are as always, many and just incredible.
The new model is right on the top of the page, 4,1 ccm Sleeve Valve Engine - was genau ist das? 28.04.2010
Thereīs so many marvels in that page it beggars belief.
Iīm rather fluent in german although not a native speaker, so itīs not a problem for me. But if someone bilingual could offer Achim his/her translation services, and of course assuming Achim would accept, it would be very beneficial. Thereīs LOTS of information in the texts that is impossible to glean just from the wonderful pictures.
Olli
Penafiel
Portugal

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: A new model from Achim
« Reply #1 on: June 01, 2010, 08:14:05 AM »
Just in case you havenīt noticed, thereīs something new in  http://metallmodellbau.de/  , thatīs Joachim Steinkeīs site, he sometimes posts here as Achim. The site is in german, but the pictures are as always, many and just incredible.
The new model is right on the top of the page, 4,1 ccm Sleeve Valve Engine - was genau ist das? 28.04.2010
Thereīs so many marvels in that page it beggars belief.
Iīm rather fluent in german although not a native speaker, so itīs not a problem for me. But if someone bilingual could offer Achim his/her translation services, and of course assuming Achim would accept, it would be very beneficial. Thereīs LOTS of information in the texts that is impossible to glean just from the wonderful pictures.



Hi Cid,

Is that.... This posting?  :wave:

http://madmodder.net/index.php?topic=2456.0

Achim posts as Joachim Steinke.

I think....  :scratch:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Rob.Wilson

  • Guest
Re: A new model from Achim
« Reply #2 on: June 01, 2010, 10:39:23 AM »
Hi


Google chrome translates the site to English  :D  but not Geordie  :bang:

Rob

Offline cidrontmg

  • Full Member
  • ***
  • Posts: 229
  • Country: pt
Re: A new model from Achim
« Reply #3 on: June 01, 2010, 11:01:29 AM »
Hi Stilldrillin,
" Hi Cid, Is that.... This posting?
http://madmodder.net/index.php?topic=2456.0
Achim posts as Joachim Steinke. I think.... 

David D "

The very thing. I didnīt realize heīd  already done a post of the build here. Most of the pictures are common to both sites, but seemingly not all, and thereīs more videos in his website.
Whatever, thanks for the correction, and I think itīs worth seeing even twice!  :)

Rob.Wilson: Google chrome translates the site to English,  but not Geordie 
Ui. I stand corrected another time. Always thought Chrome actually translates german to Geordie. Same as it translates russian to something resembling jamaican   :lol:
Olli
Penafiel
Portugal