Author Topic: Sheet Metal, Pattern drafting & shop problems  (Read 3758 times)

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2565
  • Country: us
Sheet Metal, Pattern drafting & shop problems
« on: October 01, 2008, 06:43:06 AM »
Sheet Metal, Pattern drafting & shop problems
revised
by Daugherty & Powell
Chas A Bennett Co
copyrightę1961
LCCC#59-7037

   

The information covered in this title, refers to only the drawing of and patterns for the typical sheet metal, duct work, gutter and cornice along with other building details that are coming back in favor. Whether through restoration or new old style design.

That is the shop problems carried along in the title. Since it is a drafting book for use in Voc Ed classes.

It starts with

    * Drawing equipment, pencil and paper type
    * Practical Geometry
    * Practical pattern drafting
    * Heating, ventilation and air conditioning pattern development
    * Practical cornice and gutter problems
    * Radial line developments
    * Triangulation
    * Triangulation, simplified method
    * Skylights
    * Special problems, from ball development by both gores and zones to the kitchen sink


All though it was written in the 1920's, the only think that has changed is the method of drawing and laying out the patterns. Today it is done by computer and the print button on a large format printer/cutter.

The book has been revised a number of times to this addition and probably has gone through a number more since this edition.

The math,geometry and operations done to get the patterns haven't changed and for somebody that may only do an occasional job an old sheet metal book may save the day.

It has B&W photos, drawings through out for each problem.
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen

Offline Rog02

  • Madmodder Committee
  • Full Member
  • *****
  • Posts: 138
Re: Sheet Metal, Pattern drafting & shop problems
« Reply #1 on: October 01, 2008, 10:28:18 AM »
A slightly older edition of this book is available for free download at:

Essentials Of Sheet Metal Work and Pattern Drafting  by James Sharkey Daugherty  Copyright 1918
http://books.google.com/books?id=0V01AAAAMAAJ&printsec=frontcover&dq=Sheet+Metal,+Pattern+Drafting&as_brr=1#PPA9,M1
Roger
I'm OLD, I'm TIRED, and I'M GRUMPY!