Author Topic: Norvin.....  (Read 11728 times)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Norvin.....
« on: December 07, 2010, 08:26:49 AM »
Strange, how things eventually come together. This time, it's taken well over 40 years........  ::)

My computer and scanner are talking to each other again. More to the point, I can understand 'em.

I've found some old photographs.......  :thumbup:



In 1964, (I think). A pal said, he'd bought a 16 x 8 garage for £36. "It's got some old bikes in, as well"......


HRD/ Vincent Rapide & Steib sidecar.

BSA A7.

Manx Norton with Triumph 500cc engine.

All of them, around 1949 - '52 vintage........



The sidecar was fitted to the BSA, and sold.

The Triumph engine was removed, and the Vincent engine was inserted.......


Me, springtime 1967......




The owner......




A bit closer.....



T'other side......




By the time it was completed, we bunch of friends were all going our separate ways.

I guess it was sold. Just before the owner emigrated to Australia......

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1513
  • Country: england
  • Derbyshire UK
Re: Norvin.....
« Reply #1 on: December 07, 2010, 12:23:15 PM »
Hi Dave


Aaaaah..... Nostalgic sniffle.

Once had a Series C Black Shadow engine and a Featherbed frame with similar ambitions ... came to nowt. No Time. No Skill.

Did you make the engine plates yourselves? I bought some, which, to be polite, were an indifferent fit.   :bang:
I believe it was necessary to chop the crankcase casting lug off where the rear sub-frame pivot went ??
Decided not to proceed and eventually got about 80% of the bits to make a B/Shadow, although it would not have been genuine, 'cos the numbers would be wrong ... still ... 'nother sniffle ...

Wonder what happened to engine # F10/AB/1B/7767 ????

Flogged all the vinny stuff to a bloke from Bradford for what I thought then was an exorbitant sum...

Seeing what 'C' Shadows fetch now ... well ..  :(  :(

Had some 35mm contact prints of me in me Greaser Days ... had to dump 'em.

Seeing some frisky young warrior with hair and without pot-belly did my ego a lot of NBG at all ...

Dave BC





I have a few modest talents. Knowing what I'm doing isn't one of them.

Offline BillTodd

  • Hero Member
  • *****
  • Posts: 1096
  • Country: 00
  • Colchester Essex (where the lathes were made)
Re: Norvin.....
« Reply #2 on: December 07, 2010, 03:03:21 PM »
Didn't Ogri have a NorVin at one time?


BTW where's the headlight?

[edit]

Yep thought so...

http://www.paulsample-ogri.co.uk/Paul%20Sample.html




Bill (fair-weather biker)
« Last Edit: December 07, 2010, 03:07:30 PM by BillTodd »
Bill

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Norvin.....
« Reply #3 on: December 07, 2010, 03:28:26 PM »
Dave.
Yes, the plates were made from a nice piece of ally plate, he obtained from work......  :thumbup:

Bill.
When did you last see a Manx Norton, with a headlight?   :D

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!