Author Topic: First stirling engine  (Read 2140 times)

Offline ALB

  • Jr. Member
  • **
  • Posts: 28
  • Country: scotland
  • Aberdeen
First stirling engine
« on: January 27, 2011, 06:04:16 AM »
Here is a picture of my first Stirling engine
I made it without plans all from stock peices found around the garage
both cylnders are made from brass and the pistons are st/steel the rest is mild steel(except the heat sink on the power side it's from a old rc engine ::) )
« Last Edit: January 27, 2011, 06:23:58 AM by ALB »
Don't put all your eggs in one basket