As a newbie I would appreciate some help please.
I have a set of 3/4" shank M100 DEX toolholders that I use on my Colchester Student. They were supplied with CCMT 31.51 inserts (ISO equivalent CCMT 090204) retained by a torx T15 screw.
I try to keep my costs down, but these inserts are not too common on eBay - is it possible to use a thicker insert such as the commonly available CCMT32.51, (ISO CCMT 0903XX or CCMT 09T3XX)?
ANSI - ISO - THICKNESS
1.5 - 02 - 0.094" (3/32" or 2.38mm)
n/a - T2 - 0.109" (7/64" or 2.78mm)
2 - 03 - 0.125" (1/8" or 3.18mm)
2.5 -T3 - 0.156" (5/32" or 3.97mm)
I have also posted this on HSM!
Many thanks!
Dennis