Author Topic: Ugrade your machinery  (Read 3017 times)

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Ugrade your machinery
« on: December 15, 2008, 08:28:54 PM »
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5277
  • Country: us
Re: Ugrade your machinery
« Reply #1 on: December 15, 2008, 10:14:49 PM »
I don't know how many times I have seen that video... a lot probably. But I HAD to watch it again.  :dremel:

Science is fun.

We're all mad here. I'm mad. You're mad.

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2280
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Ugrade your machinery
« Reply #2 on: December 16, 2008, 04:07:25 AM »

I have seen that one a while ago but didn't post it because I knew that if I did nobody would get any work done. You would be too busy watching the chips fly. I know I was.

Erics's reply tells me that I am right. :coffee:

Once we get to that stage it will be just a matter of loading and unloading the mill and buying new cutters. :)

Cheers :beer:

Good, better, best.
Never let it rest,
'til your good is better,
and your better best