Author Topic: For beginners to machining  (Read 4433 times)

bogstandard

  • Guest
For beginners to machining
« on: December 19, 2008, 06:25:06 PM »
This is a nice easy to get about site that gives some good explanations of the basics of things.

http://www.jjjtrain.com/vms/library.html

So if you see someone talking about a certain type of operation, you will be able to understand what it is all about. Plus you might learn a lot as well.

But please be aware that it is geared towards US terminology, so a few of the sayings or words or settings (eg angles on countersinks) might be misread or different if you are from another part of the world.

John
« Last Edit: December 20, 2008, 01:15:51 AM by bogstandard »

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5504
  • Country: us
Re: For beginners to machining
« Reply #1 on: December 19, 2008, 09:20:17 PM »
Nice link John!

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Mustang

  • Jr. Member
  • **
  • Posts: 31
Re: For beginners to machining
« Reply #2 on: January 13, 2009, 11:32:03 AM »
Lot of good info there. Now I can quit  :bang:

Andy