cheers Lads
![:lol:](https://madmodder.net/Smileys/default/kranke_200-1.gif)
Ade ,,,,,,,,,nope stainless
![:)](https://madmodder.net/Smileys/default/side2side.gif)
Well thought all i had to do this morning was poke a few holes in the Knee to fix all the parts i have made , Z and Y bearing blocks not a problem then came the Z motor mount
![:bang:](https://madmodder.net/Smileys/default/BangHead.gif)
this face was not square nor flat
![:palm:](https://madmodder.net/Smileys/default/facepalm.gif)
.
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1050503.jpg)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1050502.jpg)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1050504.jpg)
**** no's what they used to machine this face
![:scratch:](https://madmodder.net/Smileys/default/icon_scratch.gif)
, So i ended up having to re machine this face .
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1050510.jpg)
wile on i cleaned up the jolly hockey stick hole too.
![:coffee:](https://madmodder.net/Smileys/default/kaffeetrinker_2.gif)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1050511.jpg)
Must admit the machining and build quality of my Chester 626 mill is utter crap
![:(](https://madmodder.net/Smileys/default/sad.gif)
, on a side note , any one with one of these machines dont even think about ordering spares ,as i will lay odds they will not fit your machine .
With that done i could now fit the Z motor mount .
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1050515.jpg)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1050518.jpg)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1050512.jpg)
Must order a box of shorter M8 socket cap screws .
Rob