Author Topic: Icon and logo wanted (Read 44034 times)

Troutsqueezer · « **Reply #50 on:** August 31, 2012, 12:21:37 AM »

I like the top one in post #41 but any are ok with me. Eric, if you need a version in gif, png or other (so you can make the white background disappear) you can email me. I updated my email address.

Or if you need me to resize while still a vector graphic (retains highest quality).

Dennis

Brass_Machine · « **Reply #51 on:** August 31, 2012, 12:42:51 AM »

Sent you 2 PMs Dennis!

Eric

Rob.Wilson · « **Reply #52 on:** August 31, 2012, 02:21:41 AM »

Now that looks the muts nuts

nice going Dennis

Rob

Pete49 · « **Reply #53 on:** August 31, 2012, 03:59:49 AM »

Got it in one Eric.

Trout you are the man worth all that Eric pays you.

Should double it
Pete

DaveH · « **Reply #54 on:** August 31, 2012, 05:08:34 AM »

Dennis,

You are a star

DaveH

srm_92000 · « **Reply #55 on:** August 31, 2012, 05:42:21 AM »

Very nice that, but will some of the younger members here know what it is without a digital readout

Steve.

PekkaNF · « **Reply #56 on:** August 31, 2012, 06:17:08 AM »

Quote from: srm_92000 on August 31, 2012, 05:42:21 AM

Very nice that, but will some of the younger members here know what it is without a digital readout

Steve.

Does older ones get it if it not in fractions

Like the logo with mauser and upmilling. Reply #44, but both on that picture are good.

Pekka

AdeV · « **Reply #57 on:** August 31, 2012, 07:18:16 AM »

Quote from: Troutsqueezer on August 31, 2012, 12:21:37 AM

I like the top one in post #41 but any are ok with me. Eric, if you need a version in gif, png or other (so you can make the white background disappear) you can email me. I updated my email address.

Or if you need me to resize while still a vector graphic (retains highest quality).

I reckon you should move the "Modder" text down about 5pixels (maybe so the bottom of the text is at the same level as the bottom of the jaw of the capliper) - that way, when the background goes, "Modder" will sit nicely in the darker blue section of the background, the caliper almost bang on the centre line, and "Mad" nicely above.

I'm glad you had better luck here than "over there".

doubleboost · « **Reply #58 on:** August 31, 2012, 07:21:26 AM »

I like it

John

ozzie46 · « **Reply #59 on:** August 31, 2012, 07:47:48 AM »

Quote from: doubleboost on August 31, 2012, 07:21:26 AM

I like it
John

Make that 2.

Ron

srm_92000 · « **Reply #60 on:** August 31, 2012, 08:21:17 AM »

Quote from: PekkaNF on August 31, 2012, 06:17:08 AM

Quote from: srm_92000 on August 31, 2012, 05:42:21 AM
Very nice that, but will some of the younger members here know what it is without a digital readout

Steve.

Does older ones get it if it not in fractions

Like the logo with mauser and upmilling. Reply #44, but both on that picture are good.

Pekka

I must be middle aged then,

, can't do fractions

but work with metric non digital kit.
I like the the bit on #44 'global model making community' perhaps that could be included just as small text along the caliper ?

Steve.

saw · « **Reply #61 on:** August 31, 2012, 08:41:10 AM »

I like the new logo but...
I prefore a little smaller logo and insted of the white background transparent color.
But, it's just me.

Brass_Machine · « **Reply #62 on:** August 31, 2012, 08:44:12 AM »

Quote from: saw on August 31, 2012, 08:41:10 AM

I like the new logo but...
I prefore a little smaller logo and insted of the white background transparent color.
But, it's just me.

I am waiting on the transparent background from Dennis.

Eric

jonesie · « **Reply #63 on:** August 31, 2012, 08:57:56 AM »

nice job dennis and good choice by the adm.i think it looks real good simple and real affective.again nice job. jonesie

PeterE · « **Reply #64 on:** August 31, 2012, 09:13:23 AM »

I also think it looks very good, well done!

But of course I have an extra idea

if the white background were transparent instead the logo would really fit the background nicely. Or?

BR

/Peter

DMIOM · « **Reply #65 on:** August 31, 2012, 09:52:09 AM »

I think its great as is, especially if the background can be transparent

Quote from: srm_92000 on August 31, 2012, 08:21:17 AM

......I like the the bit on #44 'global model making community' perhaps that could be included just as small text along the caliper ?...

Global Community - absolutely
Model Making - I would definitely vote against this - MM is about far more than Model Making

Dave

Troutsqueezer · « **Reply #66 on:** August 31, 2012, 11:06:18 AM »

Thanks for all the nice comments, Guys.

I sent three versions to Eric for eval.

AdeV, thanks for the suggestion to move the text down slightly, it was a good one. All the suggestions from you guys are good for that matter.

The upmilling graphic I threw in just in case Eric wanted to expand on it and maybe use in the upper right corner or something. It was just the result of a brain infarction.

Dennis

Brass_Machine · « **Reply #67 on:** August 31, 2012, 12:02:12 PM »

Quote from: DMIOM on August 31, 2012, 09:52:09 AM

I think its great as is, especially if the background can be transparent

Quote from: srm_92000 on August 31, 2012, 08:21:17 AM
......I like the the bit on #44 'global model making community' perhaps that could be included just as small text along the caliper ?...

Global Community - absolutely
Model Making - I would definitely vote against this - MM is about far more than Model Making

Dave

I like the idea and the picture... we would just need to change the wording....

dsquire · « **Reply #68 on:** August 31, 2012, 12:04:27 PM »

Dennis

I liked that logo last night when I saw it and was going to comment on how much I liked it but I had guests so put it off till later. Imagine my surprise when a few minutes ago I checked in for the first time to day and saw that it is the new MadModder logo. I like it. Congratulations and thanks Dennis.

Cheers

Don

srm_92000 · « **Reply #69 on:** August 31, 2012, 05:19:50 PM »

Quote from: DMIOM on August 31, 2012, 09:52:09 AM

I think its great as is, especially if the background can be transparent

Quote from: srm_92000 on August 31, 2012, 08:21:17 AM
......I like the the bit on #44 'global model making community' perhaps that could be included just as small text along the caliper ?...

Global Community - absolutely
Model Making - I would definitely vote against this - MM is about far more than Model Making

Dave

I agree entirely it was mainly the 'A global .. making community' that worked for me but how do you express to a wider audience what Modding is. Maybe 'a global makers community'

HS93 · « **Reply #70 on:** August 31, 2012, 06:06:47 PM »

Verry well done Dennis I like it a lot , but is it my pc or could Eric move it more central then we could have it even BIGGER.

nice job chaps

Peter

micktoon · « **Reply #71 on:** August 31, 2012, 06:34:22 PM »

Aye, canny logo that like ( Geordie accent coming out there )..............I like it , well done Dennis

Cheers Mick

Brass_Machine · « **Reply #72 on:** September 04, 2012, 11:16:16 PM »

I am happy with the logo! We look like a legitimate website now!!

Thanks Dennis!

Eric

PTsideshow · « **Reply #73 on:** September 05, 2012, 08:27:33 AM »

Ok I have logged out and then logged back in and don't see anything other then the simple machines one and the word MadModder across the header line? or isn't in place yet?

Brass_Machine · « **Reply #74 on:** September 05, 2012, 09:05:04 AM »

Quote from: PTsideshow on September 05, 2012, 08:27:33 AM

Ok I have logged out and then logged back in and don't see anything other then the simple machines one and the word MadModder across the header line? or isn't in place yet?

Nope it's there Glen. You may have to clear your browsers cache.

Eric

News:

Author Topic: Icon and logo wanted (Read 44034 times)

Rob.Wilson