Ade, how about colour anodising your sump, to impress the spectators when you roll the car? ![:lol:](https://madmodder.net/Smileys/default/kranke_200-1.gif)
![:lol:](https://madmodder.net/Smileys/default/kranke_200-1.gif)
Ade, that's a splendid idea from Andy.
I think you should give it some serious consideration.
And while you're at it, anodise the roof.
Thereby impressing any spectators under the car ... ![:ddb:](https://madmodder.net/Smileys/default/dancenana.gif)
![:lol:](https://madmodder.net/Smileys/default/kranke_200-1.gif)
Unfortunately, the roof is steel, will have to go with a fancy paint effect! Mind you, any spectators under a rolled car will have other things on their mind, e.g. the craftsmanship that went into removing the sunroof (it's got a sheet of tin riveted over the hole) and the remarkable snowplough on the front which, there's a good chance, has just removed their legs
![:zap:](https://madmodder.net/Smileys/default/electricf.gif)
I do like the idea of anodizing it. I've got a couple of knackered car batteries, would it be sensible to use that as the acid, or should I shell out on the proper stuff?
More importantly, what colour??? I can think of red (common), blue (nicer IMHO, but still common), gold (a bit blingy perhaps), green (eco-special V8
![:)](https://madmodder.net/Smileys/default/side2side.gif)
)....?
Although it's cut out of ali, there is one steel insert (the threaded bar that holds one of the plugs in), I don't want that to vanish in whatever solution(s) I use.
If I'm going to anodize, I'd like to do it before I skim the top (that bit won't be seen anyway, and I just prefer the idea of it being bare ali).