Author Topic: Belated Hello from new member!  (Read 5009 times)

Offline naffsharpe (Nathan)

  • Jr. Member
  • **
  • Posts: 88
  • Country: wales
Belated Hello from new member!
« on: December 31, 2011, 03:19:30 PM »
Hi All, from very wet Wales (Bangor area). I arrived here following a thread on ME forum by Bogstandard, so it's all his fault! I like to make "things"/play and make guitars/mess about with electronics/ drink Jack Daniels. The workshop is contains my Harrison 9" (L5) and  an Axminster/Tiwanese mill and all the usual junk. I'll lurk until I have something useful/useless to say. Naff.

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Belated Hello from new member!
« Reply #1 on: December 31, 2011, 05:38:43 PM »
Hi Naff.  :wave:

Welcome to the Collective!  :borg:

Don't be too shy. Everyone can add something, sometime.

Pics are a great help, in showing us what you do/ make.  :D

Join in.... Enjoy! We do!  :thumbup:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: Belated Hello from new member!
« Reply #2 on: December 31, 2011, 06:22:31 PM »
Hi welcome and Happy New Year  :ddb: :ddb: :ddb:
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline spuddevans

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1618
  • Country: 00
  • Portadown, Northern Ireland
    • My Photo website
Re: Belated Hello from new member!
« Reply #3 on: January 02, 2012, 11:58:42 AM »
Hi there Nathan :wave: Welcome to the club.

I have made a couple of guitars a few years ago, although on the 1st one I took the easy way and bought a pre-made neck. I posted a couple of pics on here of my 2nd attempt, http://madmodder.net/index.php?topic=2264.0


Hope to see some of your work too, hint hint, nudge nudge  :worthless: :lol:


Tim
Measure with a micrometer, mark with chalk, cut with an axe  -  MI0TME

Offline naffsharpe (Nathan)

  • Jr. Member
  • **
  • Posts: 88
  • Country: wales
Re: Belated Hello from new member!
« Reply #4 on: January 02, 2012, 04:01:02 PM »
Hi Tim, Nice bass!!  One of my acoustic builds is due for a new neck so I'll take some pics and post them here.

Nathan.

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: Belated Hello from new member!
« Reply #5 on: January 02, 2012, 04:51:07 PM »
Hi
Welcome to mad modders
John

Offline PeterE

  • Sr. Member
  • ****
  • Posts: 458
  • Country: se
  • Gothenburg
Re: Belated Hello from new member!
« Reply #6 on: January 03, 2012, 02:15:32 AM »
Hi and very welcome to us!   :wave:

BR

/Peter
Always at the edge of my abilities, too often beyond ;-)

Offline kayz1

  • Full Member
  • ***
  • Posts: 114
Re: Belated Hello from new member!
« Reply #7 on: January 03, 2012, 03:45:35 PM »
Hi Naff, new here myself to but they are a good lot, let me lurk for yonks before i had the getup and go to joinin. I still have not input much as i am a newbie to all this machine stuff, i to have a Harrison 9" (L5) in the garage. It had been 25 years under a sheet with the leaky roof doing it's stuff all over it, i took a peek and thought sod it i will buy a new-un. Bought a Chester 9*20 lathe and a 16v mill, just got the lathe setup today so i will start asking lots of stuff very SOON.
 Regards. Lyn in Holywell.... :beer:

Offline naffsharpe (Nathan)

  • Jr. Member
  • **
  • Posts: 88
  • Country: wales
Re: Belated Hello from new member!
« Reply #8 on: January 04, 2012, 01:36:32 PM »
Hello and thanks.  Shame about the Harrison but at least you don't have far to go for spares. I've done quite a bit of machining over the years but not much model making, should rectify that soon.
                                                                                 Nathan.

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Belated Hello from new member!
« Reply #9 on: January 04, 2012, 06:23:56 PM »
Hi Nathan, So, Bogs thread led you here eh?   Bog's youtube videos led me to here via HMEM so very long ago now (2008!)
Wet Wales? I don't belive it!  ... Quick look out the window....  Oh, yes! Wet, windy and miserable as sin! :doh:


Hope to see what you're upto soon...     :ddb:


Oh and While I'm here... Hi to Lyn as well. Hope you're going to post some of your adventures too?  :thumbup:
Questions... That's what keeps this place running.... Along with the friendly answers :)


Chester UK.. 5 min's away for me   :headbang: Only annoying part... They shut on Saturdays now!  :(



Don't care if it's already been said.....


Both.... Welcome to the collective  :borg:





Ralph.
I know what I know and need to know more!!!

Offline Deko

  • Sr. Member
  • ****
  • Posts: 258
  • Country: england
Re: Belated Hello from new member!
« Reply #10 on: January 31, 2012, 03:01:29 PM »
Hi Nathan
               I am a bit late on the uptake (nowt unusual there). As you are into guitars and live in north Wales, i thought you may know a mate of mine who lives near Mold. His name is Eric, and he loves making the things, and a bunch of mates get together a few nights a week for a bash at the blues.  :beer: I know!!! Wales is fairly big, :palm: but at least you are both at the same end. :thumbup:

Oh!! nearly forgot, welcome     :nrocks:    :ddb: :ddb: :ddb: :ddb: :ddb: :ddb: :ddb: :ddb: :ddb: :ddb:

   Cheers  Derek

Offline bvd1940

  • Jr. Member
  • **
  • Posts: 27
  • Country: us
Re: Belated Hello from new member!
« Reply #11 on: February 05, 2012, 12:50:39 PM »
Welcome to the Mad Modder forum Naff  :nrocks:
Given the proper motivation & time anything can be fixed

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: Belated Hello from new member!
« Reply #12 on: February 12, 2012, 06:43:42 AM »
Welcome from me too.