Author Topic: Side beam engine  (Read 9014 times)

Offline naffsharpe (Nathan)

  • Jr. Member
  • **
  • Posts: 88
  • Country: wales
Side beam engine
« on: January 01, 2012, 05:35:32 PM »
Hi, I found Tels post on this engine and was intending to ask a few questions about it but at more than 120 days since last post I thought it may not be read. Tel did you finish it and any chance of a photo or two ? I was really impressed at how elegant you made it look around the valve gear, much better than the original. I,d already decided to build it at either 1.5 or 2 x scale and would love to see how it turned out. Many thanks. Naff (nathan).

Rob.Wilson

  • Guest
Re: Side beam engine
« Reply #1 on: January 01, 2012, 06:05:23 PM »
Hi Nathan

The post would have been read , it would get bummed to the top  :thumbup: 

You may wish  to have a look over here at Tel's build log of the engine http://www.homemodelenginemachinist.com/index.php?topic=6749.0



Rob

Offline naffsharpe (Nathan)

  • Jr. Member
  • **
  • Posts: 88
  • Country: wales
Re: Side beam engine
« Reply #2 on: January 01, 2012, 06:25:03 PM »
Thanks Rob, You're a gent.

Rob.Wilson

  • Guest
Re: Side beam engine
« Reply #3 on: January 01, 2012, 06:29:43 PM »
Glad to help Nathan

 and welcome to Madmodders  :wave:  hope we get to see your engine build  :poke: :)


Rob