Author Topic: Jointer Knife Jig  (Read 3506 times)

Offline Stephenwp

  • Jr. Member
  • **
  • Posts: 9
  • Country: us
    • ShopNGarage
Jointer Knife Jig
« on: March 22, 2012, 08:13:29 AM »
Here is a jig I made for setting jointer knives.



Offline bvd1940

  • Jr. Member
  • **
  • Posts: 27
  • Country: us
Re: Jointer Knife Jig
« Reply #1 on: March 22, 2012, 06:00:34 PM »
Real nice job Stephenwp  :beer: thanks for sharing. :D
Given the proper motivation & time anything can be fixed

Rob.Wilson

  • Guest
Re: Jointer Knife Jig
« Reply #2 on: March 22, 2012, 06:42:25 PM »
 :clap: :clap: :clap:  nicely done  Stephenwp   :dremel:


Rob

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2016
  • Country: gb
Re: Jointer Knife Jig
« Reply #3 on: March 22, 2012, 08:18:16 PM »
yep well dun

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4912
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Jointer Knife Jig
« Reply #4 on: March 23, 2012, 04:34:00 AM »
Don't know what jointer knives are.....  :scratch:

But, the setting jig is a very nicely made tool! :thumbup: :clap: :clap:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2216
  • Country: gb
Re: Jointer Knife Jig
« Reply #5 on: March 23, 2012, 05:20:46 AM »
Looks like the blade from a bench planer?

Nice looking tool for setting the blades.. :thumbup:
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline DavidBraley

  • Jr. Member
  • **
  • Posts: 21
  • Country: us
  • Fort Collins, Colorado
Re: Jointer Knife Jig
« Reply #6 on: March 23, 2012, 10:38:12 AM »
Man, that is nice! Made from Red Oak too. I like that brass shoe you put on the bottom. Nice touch.

Wood is Good!
-David

Horsepower determines how fast you hit the wall. Torque determines the size of the hole you make.