« previous next »
Pages: [1]   Go Down

Author Topic: newbie from australia  (Read 4387 times)

Offline ironman

  • Full Member
  • ***
  • Posts: 157
  • Country: au
newbie from australia
« on: June 08, 2012, 03:05:04 AM »
I just thought about breaking the ice as a new member. I love making model steam engines and model generators. I started a f&t apprenticeship 40 years ago and that is when I built my first model steam engine. I'm not up to speed with computers so I hope this post gets to the right place. This is a link to one of my model generators
It is always great to see someone elses work so I put this link in to break the ice
       
                                                                                                              ironman
Logged

Rob.Wilson

  • Guest
Re: newbie from australia
« Reply #1 on: June 08, 2012, 05:10:05 AM »
Welcome to Madmodder ironman  :wave:

Watched all your casting videos  :bow: :bow: :bow:  , very impressive ,,,  :headbang:  looks like your cupola runs well  :)


Rob
Logged

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: newbie from australia
« Reply #2 on: June 08, 2012, 10:58:07 AM »
hi jump in and have fun
Logged

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: newbie from australia
« Reply #3 on: June 08, 2012, 02:35:45 PM »
Hi and welcome  :wave:
Logged
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline spuddevans

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1618
  • Country: 00
  • Portadown, Northern Ireland
    • My Photo website
Re: newbie from australia
« Reply #4 on: June 08, 2012, 02:40:45 PM »
Hi there Ironman :wave: Welcome to our little club :mmr:


Tim
Logged
Measure with a micrometer, mark with chalk, cut with an axe  -  MI0TME

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: newbie from australia
« Reply #5 on: June 08, 2012, 03:52:49 PM »
Hi Ironman  :wave:

Hello and welcome to MadModder  :clap:
 :beer:
DaveH
Logged
(Ex Leicester, Thurmaston, Ashby De La Zouch.)

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: newbie from australia
« Reply #6 on: June 08, 2012, 05:31:57 PM »
Hi Ironman
Welcome to Madmodders :beer: :beer: :beer:
I have just watched your videos :thumbup:
The hot crucible in to the water amazed me :jaw: :jaw:
John
Logged

Offline ironman

  • Full Member
  • ***
  • Posts: 157
  • Country: au
Re: newbie from australia
« Reply #7 on: June 08, 2012, 09:27:03 PM »
Thankyou for the replies. I am busy with work at the moment so when I get time I will post some of my videos of my model steam engines. Does anyone in this forum make castings for their models? It is always interesting to see other peoples work because I can learn so much from them.
                                                                       :thumbup:
Logged

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: newbie from australia
« Reply #8 on: June 09, 2012, 02:09:02 AM »
Hi Ironman.
Welcome to the Collective......  :borg:

Does anyone in this forum make castings for their models? 

Ohh.... Yes! You've come to the right place.  :thumbup:

Join right in. Have fun..... We do!  :)

David D

Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline AussieJimG

  • In Memoriam
  • Sr. Member
  • *****
  • Posts: 381
  • Country: au
Re: newbie from australia
« Reply #9 on: June 14, 2012, 01:46:35 AM »
Welcome to the collective Ironman
Jim
Logged

Offline Mayhem

  • Full Member
  • ***
  • Posts: 130
  • Country: au
  • purveyor of mischief
Re: newbie from australia
« Reply #10 on: June 28, 2012, 08:22:24 AM »
G'Day from Perth Ironman.
Logged
Pages: [1]   Go Up
« previous next »