Author Topic: Ingots sticking in mold  (Read 3982 times)

Offline ironman

  • Full Member
  • ***
  • Posts: 157
  • Country: au
Ingots sticking in mold
« on: July 10, 2012, 08:47:44 PM »
Does anyone have trouble with ingots not coming out of the mold? I have found a solution to the problem click onto the link to see how I fixed it   

Offline AdeV

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2434
  • Country: gb
Re: Ingots sticking in mold
« Reply #1 on: July 11, 2012, 06:54:51 AM »
You can embed YouTube videos, y'know... Just click the "YouTube" button (1st button, 2nd line of icons above the smileys), and paste in the video's link code:

i.e. {youtube}wyEeYfZvSpg{/youtube} <-- swap curly brackets for square ones

Ends up looking like this:

Cheers!
Ade.
--
Location: Wallasey, Merseyside. A long way from anywhere.
Occasionally: Zhengzhou, China. An even longer way from anywhere...

Offline Mayhem

  • Full Member
  • ***
  • Posts: 130
  • Country: au
  • purveyor of mischief
Re: Ingots sticking in mold
« Reply #2 on: July 11, 2012, 08:26:02 AM »
Thanks for the tip Ironman.  No more dropping them on the floor several times!