Author Topic: The Complete Handbook of Centrifugal Casting  (Read 2219 times)

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2565
  • Country: us
The Complete Handbook of Centrifugal Casting
« on: May 12, 2008, 06:57:03 AM »
The Complete Handbook of Centrifugal Casting
by Philip Romanoff
Tab Books #1153
copyright 1981
ISBN 0-8306-1153-3
       
I can say that I never really got thru this completely, as it is more geared to expensive equipment, and casting more that a couple parts at a time with the spin casting.
The sections on mold making and silicone rubber molds, along with the alloys used. and following through his steps for some of the centrifugal casting one ofs was worth the cost.
The descriptions of the various other casting methods involving spinning. the chapters on inserting metal inside the molds could be of use along with the cost analysis of molding,casting,polishing,and chrome plating of a car door handle was interesting.
Again it is geared toward some body that wants to make more than a few of each items.

check your library first if they are a member or find it close to home in another library
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen