« previous next »
Pages: [1]   Go Down

Author Topic: EZ 45  (Read 5886 times)

Offline Lampy

  • Jr. Member
  • **
  • Posts: 11
  • Country: us
EZ 45
« on: January 25, 2013, 10:14:54 PM »
I built this a while back, it's my 3rd EZ motor. I still need to make a proper base for it. The first one I built is ugly as sin but will run on less than 10 PSI. This one is a better looking but needs 20 PSI to run. It should smooth out and use less air with some more run time.

Logged

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: EZ 45
« Reply #1 on: January 26, 2013, 05:37:18 PM »
That's neat!  :thumbup:

Love the single screw fixing!  :clap:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2893
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: EZ 45
« Reply #2 on: January 26, 2013, 07:45:27 PM »
Yes, nice work, I also like the single screw! Looks smart
Chris
Logged

Offline Lampy

  • Jr. Member
  • **
  • Posts: 11
  • Country: us
Re: EZ 45
« Reply #3 on: January 27, 2013, 07:00:09 AM »
Here is a video of it running. It's surprising how satisfying building one of these can be.
Logged

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: EZ 45
« Reply #4 on: January 27, 2013, 08:14:02 AM »
Nice!  :clap: :clap:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!
Pages: [1]   Go Up
« previous next »