Author Topic: 2" chuck refit  (Read 6104 times)

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
2" chuck refit
« on: February 17, 2013, 06:33:34 PM »
hi all was given this as it was gowning in the bin their is no makers name on it it just has a number 704 on all of the bits it was dismantled to clean but the fixing screws and the pinion was Miss palest and never fawned a gane so the first job was to have a rut in me chuck key box to find a key that wood mach the scroll i had one but it needed a bit of work the bit that fits in to the chuck body the out side diameter on the chuck key was to Small so it needed a sleeve putting over and a sqear in the middle for a chuck key well i cheated as all i did was to drill threw a m5 stainless steel cap head Field it out so that a Alan key wood go all the way threw then the hole lot silver soldered up still need to find sum screws to fit it as they will be inch can any one help in identifying the mack of chuck right pics



Offline kayz1

  • Full Member
  • ***
  • Posts: 114
Re: 2" chuck refit
« Reply #1 on: February 17, 2013, 07:41:21 PM »
and another fantastic save.. :thumbup:
 Lyn.

Offline fixerup

  • Jr. Member
  • **
  • Posts: 39
Re: 2" chuck refit
« Reply #2 on: February 17, 2013, 09:37:59 PM »
That fix is what I call think outside the box. Well done!
Thanks for posting!
Phil

Offline sparky961

  • Hero Member
  • *****
  • Posts: 844
  • Country: ca
Re: 2" chuck refit
« Reply #3 on: February 18, 2013, 12:50:25 AM »
Very creative fix.  I still need to remind myself just to start "sticking bits together" and trust my instincts, rather than think about something for an hour or more.

-Sparky

Offline jb3cx

  • Jr. Member
  • **
  • Posts: 86
Re: 2" chuck refit
« Reply #4 on: February 18, 2013, 01:40:42 PM »
Hi Bob you need to talk to double boost (john)as he knows all about knackered chucks  :lol:

Offline Fredbare

  • Full Member
  • ***
  • Posts: 169
  • Country: gb
  • Fakenham, Norfolk
Re: 2" chuck refit
« Reply #5 on: February 18, 2013, 03:46:38 PM »
Just brilliant Bob, thanks for showing.

John

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: 2" chuck refit
« Reply #6 on: February 18, 2013, 03:52:00 PM »
Another good un Bob!  :thumbup:

Well done.....  :clap: :clap:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline millwright

  • Sr. Member
  • ****
  • Posts: 273
  • Country: gb
  • Leeds West Yorshire
Re: 2" chuck refit
« Reply #7 on: February 18, 2013, 04:18:48 PM »
Another good salvage job Bob, nothing gets wasted in your workshop.  :beer:

John

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: 2" chuck refit
« Reply #8 on: February 18, 2013, 05:36:49 PM »
thanks all for the coments no i wast nothing