Author Topic: help drumond rawnd bed model a i think  (Read 1502 times)

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2081
  • Country: gb
help drumond rawnd bed model a i think
« on: April 05, 2013, 07:40:23 PM »
hi can any one tell me the pich and size of the thred on the spindel  ie the bit the chuck gos on to

lordedmond

  • Guest
Re: help drumond rawnd bed model a i think
« Reply #1 on: April 06, 2013, 03:29:54 AM »
Its a long time ago since I had one of those mine was on its treadle stand ( by was motored )


as to you question  if my single grey cell is Ok its 7/8 whit


there is plenty of info here http://www.lathes.co.uk/drummondroundbed/

Tony comments on the spindle size about halfway down the second lump of text

Stuart

Offline chipenter

  • Hero Member
  • *****
  • Posts: 830
  • Country: gb
Re: help drumond rawnd bed model a i think
« Reply #2 on: April 06, 2013, 04:14:27 PM »
The thread on mine is 3\4 whitworth with a 25\32 register ,
Jeff

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2081
  • Country: gb
Re: help drumond rawnd bed model a i think
« Reply #3 on: April 06, 2013, 05:06:18 PM »
thanks all for the help