« previous next »
Pages: [1]   Go Down

Author Topic: For newbs with a lathe. - i found this usefull .=)  (Read 5215 times)

Offline NeoTech

  • Hero Member
  • *****
  • Posts: 826
  • Country: se
    • Roughedge Hobbyworks
For newbs with a lathe. - i found this usefull .=)
« on: April 13, 2013, 11:49:13 AM »
I hade a piece of 120x120x20mm barstock left that i needed to make a 110mm belt pulley out of.. So i took the opporunity to try this technique out..
the result:

And for other lathe n00bs like me.. here is the instruction vid.. i found that PSA paper can be replaced with coarse drawing paper or similar. =)
Logged
Machinery: Optimum D320x920, Optimum BF20L, Aciera F3. -- I have not failed. I've just found 10,000 ways that won't work. http://www.roughedge.se/blogg/

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: For newbs with a lathe. - i found this usefull .=)
« Reply #1 on: April 14, 2013, 09:17:47 AM »
Hi,
    An interesting post could be used to get you out of a tight spot when you have limited facilities.

                                                             Cheers David
Logged

Offline fixit

  • Jr. Member
  • **
  • Posts: 43
  • my first engine
Re: For newbs with a lathe. - i found this usefull .=)
« Reply #2 on: April 15, 2013, 01:09:15 PM »
thanks for taking the time to post this


Stevefixit
Logged
northolt,near Mc donalds, next to Pc World
Pages: [1]   Go Up
« previous next »