Author Topic: Morse taper drills  (Read 6928 times)

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Morse taper drills
« on: May 07, 2013, 06:39:59 PM »
I have about 150 kg of Morse taper drills to dispose of.
A few MT1, and the rest MT2 up to MT5 all good quality and many just been professionally resharpened.
Quite a few long series.

Looking at £2 per drill regardless of size. These will have to be collected from Notts Derby border M1 J24 / 25 area, Long Eaton post code NG10

Don't ask me to sort any out, not going to happen and no I don't have lists of sizes.
Definitely not packing and posting for two quid each unless anyone is prepared to pay £35 an hour for me to go to the post office.

I'm going to the Harrogate show on Friday, will put a load in the van and will be in the main car park opposite the main admission doors 3:00pm onwards. look for a bright blue Fiat Ducato van with Stevenson Engineers on the side.

What hasn't gone by end of the month is getting weighed in
John Stevenson