Author Topic: Scraper Planes  (Read 4160 times)

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Scraper Planes
« on: June 11, 2013, 02:42:55 PM »
Hi Guys,
                These are two Scraper Planes I built using the castings from old smoothing planes. One is a no4 and the other a no 4.1/2 . Both planes perform very well and I have used them on difficult hard wood timbers.

                                                                 Cheers David

Offline flyingtractors1

  • Sr. Member
  • ****
  • Posts: 268
Re: Scraper Planes
« Reply #1 on: June 11, 2013, 03:04:14 PM »
Very nice.  Clever use of the frog.  Well done.  Ralph